;

NEWS

How to evaluate the quality of a custom wire harness supplier?

2026-11-13

24

How to evaluate the quality of a custom wire harness supplier

Custom wire harnesses are widely used in medical devices, industrial sensors, automation and communication systems. Poor harness quality can lead to signal dropout, short circuit, equipment failure and safety hazards. Use these criteria to systematically evaluate a supplier’s quality level.

1. Industry Certifications & Compliance

Certifications are the foundation of quality assurance, especially for medical and high-reliability applications.

  • ISO 13485: mandatory for medical wire harness manufacturing

  • ISO 9001: general quality management system

  • IEC 60601: medical electrical equipment safety standard

  • UL, RoHS, REACH: wire and environmental compliance

  • IATF16949 (if for automotive harness)

Check whether certificates are valid, not just screenshots. Ask for test reports for raw materials and finished cables.

2. Raw Material Incoming Quality Control (IQC)

Quality starts from raw components.

  • Cables: copper conductor purity, insulation material, voltage rating

  • Connectors: genuine brand parts (Molex, JST, Huber+Suhner etc.) or qualified alternatives, avoid counterfeit connectors

  • Auxiliary materials: heat shrink tube, ferrite core, adhesive, shielding foil

  • Request IQC records to verify they inspect every batch of incoming materials

3. In-process Quality Control (IPQC) & Workmanship Standard

Check their production control standards:

  • Crimping: crimp height & width monitoring, crimp pull force test

  • Stripping: no copper nicking, consistent stripping length

  • Soldering: full solder wetting, no cold solder, no solder bridge

  • Shielding treatment: shield continuity, proper grounding

  • Strain relief, overmolding, ferrite assembly neatness

  • Wire routing, labeling and marking clarity

4. Finished Product Testing Standards

Reliable suppliers perform standardized electrical tests before shipment:

  • Continuity test: verify correct pinout

  • Insulation resistance test

  • Hipot / high voltage withstand test

  • Shield continuity test

  • Pull test for crimp terminals

  • 100% full test for critical medical harnesses, not only random sampling

5. Batch Traceability System

A qualified supplier can trace every finished harness back to:

  • Raw material batch number

  • Production date, operator, test record

  • Lot number for rework or recall if quality issues occur This is critical for medical and regulated industrial products.

6. Engineering & Drawings Validation Capability

Quality is also about avoiding design mistakes:

  • Review your schematic, pin assignment and 2D drawing before production

  • Proactively remind risks such as EMI interference, insufficient strain relief, wrong connector selection

  • Provide sample confirmation before mass production

  • Keep revision records for drawing changes

7. Sampling Consistency & Mass Production Stability

Many suppliers make good samples but fail mass production.

  • Compare sample and bulk production workmanship, dimension and testing data

  • Check whether they maintain the same material and process after sample approval

  • Ask for past customer feedback on long-term order consistency

8. Quality After-sales & Corrective Action

Evaluate how they handle non-conformities:

  • Clear quality warranty terms

  • Formal 8D report / corrective action plan when defects happen

  • Rework, replacement or compensation mechanism

  • Preventive actions to avoid repeated quality problems

9. Delivery & Document Support

Quality delivery also belongs to quality performance:

  • Stable lead time, avoid rush production that sacrifices quality

  • Provide COC, test certificates, packing list as required

  • Clear labeling, proper anti-static packaging for sensitive harnesses

Get in Touch

  • Email: cksale2@szcklt.com

  • Whatsapp:0086-13533612990

  • Mob.:0086-13533612990

  • Website: www.szcklt.com